Take me to the home page! Contact Kallkwik via email, telephone, or contact form Find what you want quickly using our sitemap
 
Schirmer BAZ 1000-G6 / SU 2 “Tandem”

 

 

Schirmer BAZ 1000-G6 / SU 2 “Tandem”

High Speed Machining and Cutting Centre

 

Photo 1

Photo 2

Back to machinery

 

 

 

 

 

 


Schirmer BAZ 1000-G6 / SU 2 “Tandem” high speed machining and cutting centre, for window frame, sash and door profiles. For prepping and cutting one PVCu length at a time, to cut at 45 and 135 degrees for mitre cuts and 90 degrees for square cuts, arrowheads, V and part V notching from the bottom. (Moving direction from the right to the left.) Features include:

  • Machining support in solid weldment construction.
  • Automatic in-feed carousel magazine with 12 positions visible at a time, indexes as required by the computer software. Loading requirements displayed on the control console monitor.
  • Special extruded anodised aluminium support sections with rollers, to maintain adequate support for a variety of gasketed profile types.
  • High Speed Magnetic Drive NC-Controlled In-feed Gripper Unit to transport the full 6 metre or re-usable off cut bars through the BAZ 1000-G machining centre, fitted with linear encoder for greater accuracy at such high speed.
  • Positioning speed up to 150 m/min.
  • Electronics and Fibre Optic Control Circuitry.
  • Necessary Roller Clamps and Moving Supports to hold the profile in the correct position.
  • G-Module with NC control in six axis, x, y and z-direction for the positioning of the various tools required for the preparation of the PVCu component bars (not in steel), fitted with routers and drills to perform almost any operation.
  • Profile Height Safety Check, automatic inline profile height calibrator with operator warning message and auto correction of point to point for length cut (fitted to the G-Module).
  • Canopy to provide for a safe working area and reduction in noise and swarf.
  • Swarf Catcher Trays with extractor connections.
  • PC-Machining-Control-Console, Type C 6140 (Beckhoff), complete with 7-Slot-ATX-Industrial-PC. PC-Operation Tableau with 15’’ TFT-Display and K7000 keyboard. Broad suite of appropriate software. (We reserve the right to adapt these specifications to the changing PC-Standards.)
  • Electronic Service Cabinet fixed at machine frame.
  • Handover station between BAZ I and BAZ II.
  • High Speed Magnetic Linear Transfer NC-Controlled Gripper Unit to take over the transportation of the 6 metre length through the SU 2 cutting unit, fitted with linear encoder for greater accuracy at such high speed.
  • Profile Support Sections with Rollers and Clamps to guide the machined bar through the SU 1 cutting unit.
  • Machining Support in solid weldment construction for the cutting centre.
  • Necessary Clamps and Moving Supports to hold the profile in the correct position.
  • SU 2 Cutting Unit for the single track system. Robotic Cutting area with two saw units, each independently driven by NC controlled axle drives in x, y and z-axis and NC tilting of the saw to ensure smooth movement to avoid blade oscillation, all cuts can be performed, incl. two saw blades fitted to high speed motors with frequency modifier.
  • Min. cut size 296 mm point to point.
  • Max. cut size 3500 mm point to point.
  • Waste Piece Conveyor to take the cut waste from under the saw and discharge them into customers own container.
  • Canopy to provide for a safe working area and reduction in noise and swarf.
  • Triple Drill Unit for internally beaded sashes, controlled in y and z, for varying backset depths and heights.
  • Swarf Catcher Trays with extractor connections.
  • Electronics and Fibre Optic Control Circuitry.
  • High Speed Magnetic Drive NC-Controlled Out feed Gripper.
  • Unit to transport the cut pieces to the out-feed belt table.
  • Motorised Out-feed Belt Table approximately 3,500 mm wide x 2,400 mm deep, with small piece area (for pieces max. 3,.500 mm long).
  • Connections for dust extractor.
  • Label Printer Connection, Stand and Cabling.
  • Safety Fencing, according to actual EU safety regulations, incl. requisite doors, and connection to central control-emergency-stop-system.

 


Y.O.M - Late 2005

 


Price On Application